Enhancing quality of CsPbIBr<sub>2</sub> inorganic perovskite via cellulose acetate addition for high-performance perovskite solar cells

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

CsPbIBr ₂perovskite has been considered as a promising candidate for the light-harvesting material of perovskite solar cells (PSCs) due to its acceptable band gap and high stability. Nevertheless, the efficiency of CsPbIBr ₂-based PSC still lags behind that of its homologs and is far away from the theoretical value. This can be attributed to the poor quality of CsPbIBr ₂perovskite film. Therefore, it is highly desirable to improve the quality of CsPbIBr ₂perovskite film for enhancing the photovoltaic performance of CsPbIBr ₂PSCs. In this work, cellulose acetate (CA) is used as a polymer additive that is introduced into CsPbIBr ₂precursor solution for improving the quality of CsPbIBr ₂perovskite film via controlling crystallization process. The interaction between the C=O group of CA and Pb ²⁺in the precursor solution and the enhanced viscosity of precursor solution induced by CA addition reduce the crystallization rate of CsPbIBr ₂perovskite. As a result, a compact CsPbIBr ₂perovskite film with high crystallinity, large grain size, and low density of defect is prepared. The remarkably improved quality of CsPbIBr ₂perovskite film upon CA addition can be attributed to the relatively slow crystallization rate. The slow crystallization rate allows the perovskite film to have enough time to form perfect perovskite crystal structure with large-size crystal grain and low density of defects. Furthermore, the oxygen functional groups of CA can passivate the undercoordinated Pb ²⁺, which effectively suppresses the defects and traps induced by Pb ²⁺in CsPbIBr ₂perovskite film. The stability of CsPbIBr ₂perovskite film is also greatly improved by CA addition. The added CA does not participate into the CsPbIBr ₂perovskite crystal but distributes at the grain boundaries and, or, interfaces area and forms a moisture barrier around perovskite grains, which obviously enhances the stability of CsPbIBr ₂perovskite film in the ambient air. The carbon-based CsPbIBr ₂perovskite solar cells with a configuration of FTO/TiO ₂/perovskite film/ carbon are fabricated by using the carbon layer as both the hole-transport layer and the back electrode. Under the illumination of 100 mW/cm ², the PSC based on CA-CsPbIBr ₂perovskite film delivers a high conversion efficiency of 7.52%, which is increased by 40% compared with the efficiency of the device based on the pure CsPbIBr ₂perovskite film. In addition, the PSC based on CA-CsPbIBr ₂perovskite film shows a hysteresis index (HI) of 7%, while the device based on pure CsPbIBr ₂film displays a higher HI of 22%. This result demonstrates that the CA addition can effectively suppress the hysteresis effect of inorganic PSCs. The stability of the PSC based on CA-CsPbIBr ₂perovskite film is investigated by tracking the variation of the efficiency with time in the ambient condition. The fabricated PSCs without any encapsulation are stored in the air. The photovoltaic performance is measured once a day. The efficiency of the PSC based on CA-CsPbIBr ₂perovskite remains more than 90% of its initial value after being stored in the air for 800 h, showing an excellent long-term stability. Therefore, this work provides a facile and effective method of improving the quality of CsPbIBr ₂perovskite films, which is expected to be helpful in developing high-efficiency and stable carbon-based inorganic PSCs.

Keywords:

Authors and contacts

Corresponding author:Wang Gui-Qiang,wgqiang@bhu.edu.cn

Funds:Project supported by the Key Program of the Education Department of Liaoning Province, Chinese (Grant No. LZ2019003)

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]

Cited By

DownLoad: Full-Size Img PowerPoint

电池	扫描方向		V_oc/V	J_sc/(mA·cm²)	FF	PCE/%	HI^a	R_rec/Ω
CsPbIBr₂	正向	平均	0.96 ± 0.05	9.89 ± 0.39	0.33 ± 0.4	3.13 ± 0.72	22%	1448
	正向	最高	1.03	10.35	0.39	4.16
	反向	平均	1.01 ± 0.03	10.21 ± 0.42	0.45 ± 0.02	4.64 ± 0.56
	反向	最高	1.07	10.62	0.47	5.34
CA -CsPbIBr₂	正向	平均	1.02 ± 0.03	10.52 ± 0.37	0.57 ± 0.02	6.12 ± 0.67	7%	2269
	正向	最高	1.06	10.91	0.60	6.94
	反向	平均	1.05 ± 0.03	10.55 ± 0.27	0.62 ± 0.02	6.87 ± 0.38
	反向	最高	1.08	10.88	0.64	7.52
^aHI = (PCE_反向–PCE_正向)/PCE_反向

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]

[1]	Luo Pan, Li Xiang, Sun Xue-Yin, Tan Xiao-Hong, Luo Jun, Zhen Liang.Effect of electron irradiation on perovskite films and devices for novel space solar cells. Acta Physica Sinica, 2024, 73(3): 036102.doi:10.7498/aps.73.20231568
[2]	Wang Hui, Zheng De-Xu, Jiang Xiao, Cao Yue-Xian, Du Min-Yong, Wang Kai, Liu Sheng-Zhong, Zhang Chun-Fu.Fabrication of high-performance flexible perovskite solar cells based on synergistic passivation strategy. Acta Physica Sinica, 2024, 73(7): 078401.doi:10.7498/aps.73.20231846
[3]	Liu Si-Wen, Ren Li-Zhi, Jin Bo-Wen, Song Xin, Wu Cong-Cong.Preparation of two-dimensional perovskite layer by solution method for improving stability of FAPbI₃perovskite solar cells. Acta Physica Sinica, 2024, 73(6): 068801.doi:10.7498/aps.73.20231678
[4]	Wang Jing, Gao Shan, Duan Xiang-Mei, Yin Wan-Jian.Influence of defect in perovskite solar cell materials on device performance and stability. Acta Physica Sinica, 2024, 73(6): 063101.doi:10.7498/aps.73.20231631
[5]	Yang Mei-Li, Zou Li, Cheng Jia-Jie, Wang Jia-Ming, Jiang Yu-Fan, Hao Hui-Ying, Xing Jie, Liu Hao, Fan Zhen-Jun, Dong Jing-Jing.Improvement of performance of CsPbBr₃perovskite solar cells by polyvinylidene fluoride additive. Acta Physica Sinica, 2023, 72(16): 168101.doi:10.7498/aps.72.20230636
[6]	Li Pei, Xu Jie, He Chao-Hui, Liu Jia-Xin.Experimental study on irradiation of perovskite solar cells. Acta Physica Sinica, 2023, 72(12): 126101.doi:10.7498/aps.72.20230230
[7]	Zhu Yong-Qi, Liu Yu-Xue, Shi Yang, Wu Cong-Cong.High performance perovskite solar cells synthesized by dissolving FAPbI₃single crystal. Acta Physica Sinica, 2023, 72(1): 018801.doi:10.7498/aps.72.20221461
[8]	Wang Gui-Qiang, Wang Dong-Sheng, Bi Jia-Yu, Chang Jia-Run, Meng Fan-Ning.Tailoring of CsPbIBr₂perovskite crystallization via phenylthiourea for stable and efficiency perovskite solar cells. Acta Physica Sinica, 2023, 72(15): 158801.doi:10.7498/aps.72.20230593
[9]	Wang Cheng-Lin, Zhang Zuo-Lin, Zhu Yun-Fei, Zhao Xue-Fan, Song Hong-Wei, Chen Cong.Progress of defect and defect passivation in perovskite solar cells. Acta Physica Sinica, 2022, 71(16): 166801.doi:10.7498/aps.71.20220359
[10]	Zhou Yang, Ren Xin-Gang, Yan Ye-Qiang, Ren Hao, Du Hong-Mei, Cai Xue-Yuan, Huang Zhi-Xiang.Physical mechanism of perovskite solar cell based on double electron transport layer. Acta Physica Sinica, 2022, 71(20): 208802.doi:10.7498/aps.71.20220725
[11]	Luo Yuan, Zhu Cong-Tan, Ma Shu-Peng, Zhu Liu, Guo Xue-Yi, Yang Ying.Low-temperature preparation of SnO₂electron transport layer for perovskite solar cells. Acta Physica Sinica, 2022, 71(11): 118801.doi:10.7498/aps.71.20211930
[12]	Wang Pei-Pei, Zhang Chen-Xi, Hu Li-Na, Li Shi-Qi, Ren Wei-Hua, Hao Yu-Ying.Research progress of inverted planar perovskite solar cells based on nickel oxide as hole transport layer. Acta Physica Sinica, 2021, 70(11): 118801.doi:10.7498/aps.70.20201896
[13]	Ji Chao, Liang Chun-Jun, You Fang-Tian, He Zhi-Qun.Effect of interface modification on performances of organic-inorganic hybrid perovskite solar cells. Acta Physica Sinica, 2021, 70(2): 028402.doi:10.7498/aps.70.20201222
[14]	Yan Jia-Hao, Chen Si-Xuan, Yang Jian-Bin, Dong Jing-Jing.Improving efficiency and stability of organic-inorganic hybrid perovskite solar cells by absorption layer ion doping. Acta Physica Sinica, 2021, 70(20): 206801.doi:10.7498/aps.70.20210836
[15]	Wang Yan-Bo, Cui Dan-Yu, Zhang Cai-Yi, Han Li-Yuan, Yang Xu-Dong.Recent advances in perovskite solar cells: Space potential and optoelectronic conversion mechanism. Acta Physica Sinica, 2019, 68(15): 158401.doi:10.7498/aps.68.20190569
[16]	Cao Ru-Nan, Xu Fei, Zhu Jia-Bin, Ge Sheng, Wang Wen-Zhen, Xu Hai-Tao, Xu Run, Wu Yang-Lin, Ma Zhong-Quan, Hong Feng, Jiang Zui-Min.Temperature-dependent time response characteristic of photovoltaic performance in planar heterojunction perovskite solar cell. Acta Physica Sinica, 2016, 65(18): 188801.doi:10.7498/aps.65.188801
[17]	Chai Lei, Zhong Min.Recent research progress in perovskite solar cells. Acta Physica Sinica, 2016, 65(23): 237902.doi:10.7498/aps.65.237902
[18]	Song Zhi-Hao, Wang Shi-Rong, Xiao Yin, Li Xiang-Gao.Progress of research on new hole transporting materials used in perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 033301.doi:10.7498/aps.64.033301
[19]	Shi Jiang-Jian, Wei Hui-Yun, Zhu Li-Feng, Xu Xin, Xu Yu-Zhuan, Lü Song-Tao, Wu Hui-Jue, Luo Yan-Hong, Li Dong-Mei, Meng Qing-Bo.S-shaped current-voltage characteristics in perovskite solar cell. Acta Physica Sinica, 2015, 64(3): 038402.doi:10.7498/aps.64.038402
[20]	Ting Hung-Kit, Ni Lu, Ma Sheng-Bo, Ma Ying-Zhuang, Xiao Li-Xin, Chen Zhi-Jian.progress in electron-transport materials in application of perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 038802.doi:10.7498/aps.64.038802

Catalog

Vol. 71, Issue 1 - 2022-01-05

Metrics

Abstract views:6259
PDF Downloads:146
Cited By:0

Search

Article